- N° de stock RS:
- 177-3997
- Référence fabricant:
- KSZ8851-16MLLI
- Fabricant:
- Microchip
Article en cours d'approvisionnement. Merci de bien vouloir nous contacter.
Ajouté
Prix L'unité (en paquet de 2)
6,03 €
(TVA exclue)
7,30 €
(TVA incluse)
Unité | Prix par unité | le paquet* |
2 + | 6,03 € | 12,06 € |
*prix conseillé |
- N° de stock RS:
- 177-3997
- Référence fabricant:
- KSZ8851-16MLLI
- Fabricant:
- Microchip
Documentation technique
Législations et de normes
- Pays d'origine :
- US
Détails du produit
The KSZ8851 is a single-port controller chip with a SPI or 8-/16-/32-bit non-PCI CPU interface. Available in 32-/48-/128-pin packages, the KSZ8851 is for applications requiring cost-effective, high-throughput Ethernet connectivity in traditional embedded systems with MCUs or MPUs.
Integrated MAC and PHY Ethernet Controller
Designed for high performance and high throughput applications
Supports 10BASE-T/100BASE-TX
Supports full-duplex flow control and half-duplex back pressure collision flow control
Supports DMA-slave burst data read and write transfers
Supports IP Header (IPv4)/TCP/UDP/ICMP checksum generation and checking
Supports IPv6 TCP/UDP/ICMP checksum generation and checking
Automatic 32-bit CRC generation and checking
Simple SRAM-like host interface easily connects to most common embedded MCUs.
Supports multiple data frames for transmit and receive without address bus and byte-enable signals
Supports both Big- and Little-Endian processors
Designed for high performance and high throughput applications
Supports 10BASE-T/100BASE-TX
Supports full-duplex flow control and half-duplex back pressure collision flow control
Supports DMA-slave burst data read and write transfers
Supports IP Header (IPv4)/TCP/UDP/ICMP checksum generation and checking
Supports IPv6 TCP/UDP/ICMP checksum generation and checking
Automatic 32-bit CRC generation and checking
Simple SRAM-like host interface easily connects to most common embedded MCUs.
Supports multiple data frames for transmit and receive without address bus and byte-enable signals
Supports both Big- and Little-Endian processors
Spécifications
Attribut | Valeur |
---|---|
Physical Network Type | 100BaseTX, 10BaseT |
Host Interface | BIU |
Network Interface | 100BaseTX, 10BaseT |
IC Type | Controller IC |
Communication Mode | Full Duplex, Half Duplex |
Data Rate | 100Mbps |
Loopback Mode | Internal |
Standard Supported | IEEE 802.3u, IEEE 802.3x |
Mounting Type | Surface Mount |
Package Type | LQFP |
Pin Count | 48 |
Auto-Negotiation | Yes |
DMA Support | Yes |
Typical Operating Supply Voltage | 3.3 V |
Dimensions | 7.1 x 7.1 x 1.45mm |
Maximum Operating Temperature | +85 °C |
Minimum Operating Temperature | -40 °C |