Werma Buzzer Wall 24V ac/dc, IP65 80 dB @ 1m, AC/DC, 1-Tone
- N° de stock RS:
- 384-7919
- Référence fabricant:
- 109.010.75
- Fabricant:
- Werma
Sous-total (1 unité)*
78,51 €
(TVA exclue)
95,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 9 unité(s) prête(s) à être expédiée(s)
- Plus 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 11 unité(s) expédiée(s) à partir du 23 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 78,51 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 384-7919
- Référence fabricant:
- 109.010.75
- Fabricant:
- Werma
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Werma | |
| Product Type | Buzzer | |
| IP Rating | IP65 | |
| Minimum Sound Level | 0dB | |
| Current Type | AC/DC | |
| Number of Tones | 1 | |
| Colour | Black | |
| Mount Type | Wall | |
| Maximum Supply Voltage | 24V ac/dc | |
| Sound Level at 1m | 80dB | |
| Maximum Operating Temperature | 50°C | |
| Maximum Sound Level | 80dB | |
| Hazardous Area Certification | No | |
| Base Length | 52mm | |
| Base Width | 59mm | |
| Housing Material | Polycarbonate, ABS | |
| Tone Type | Pulse | |
| Standards/Approvals | CE, EAC, cULus | |
| Sélectionner tout | ||
|---|---|---|
Marque Werma | ||
Product Type Buzzer | ||
IP Rating IP65 | ||
Minimum Sound Level 0dB | ||
Current Type AC/DC | ||
Number of Tones 1 | ||
Colour Black | ||
Mount Type Wall | ||
Maximum Supply Voltage 24V ac/dc | ||
Sound Level at 1m 80dB | ||
Maximum Operating Temperature 50°C | ||
Maximum Sound Level 80dB | ||
Hazardous Area Certification No | ||
Base Length 52mm | ||
Base Width 59mm | ||
Housing Material Polycarbonate, ABS | ||
Tone Type Pulse | ||
Standards/Approvals CE, EAC, cULus | ||
- Pays d'origine :
- DE
WERMA Pulse Tone Buzzer, 80dB, Wall Mount - 109 Series - 109.010.75
This single-tone buzzer from WERMA sends out an audible warning signal to draw the attention of people in the vicinity. It sounds a pulse tone at a loud 80dB to alert you that something has gone wrong with a process or system or when an environmental change triggers it. The compact black unit comes with a straightforward terminal screw connector, which lets you connect up your wires just with a screwdriver. It's suitable for through-hole mounting in your industrial setup.
Features & Benefits
• Operating temperature range of -20°C to +50°C, allowing use in both harsh indoor and outdoor settings
• 52mm diameter makes the unit compact and suitable for installation in tight spaces
• Supply voltage is 24V AC/DC for use in standard systems
• When correctly installed, the unit has an IP65 (ingress protection) rating, indicating it's protected from dust and water spray
Applications
• Smoke alarms
• Entry and exit alerts on fire doors
How much current does a buzzer need?
The current requirement of a buzzer depends on what type it is. For example, magnetic buzzers use more power and will consume between 30 to 100mA, while piezo buzzers consume less than 30mA.
Liens connexes
- Werma Buzzer Wall 24V AC/DC, 8-Tone
- Werma Buzzer Wall 24V ac/dc AC/DC, 1-Tone
- Werma Buzzer Wall 230V ac AC, 1-Tone
- Werma Buzzer Wall 230V ac AC, 8-Tone
- Werma 118 Series Buzzer Wall 24V AC/DC, 1-Tone
- Werma 119 Series Buzzer Wall 24V AC/DC, 2-Tone
- Werma 109 Series Buzzer Wall 115V ac/dc AC/DC, 1-Tone
- Werma 110 Series Buzzer Wall 115V ac AC, 8-Tone