- N° de stock RS:
- 437-2797
- Référence fabricant:
- 8AFKJAE6FT/H50T
- Fabricant:
- Interroll
- N° de stock RS:
- 437-2797
- Référence fabricant:
- 8AFKJAE6FT/H50T
- Fabricant:
- Interroll
Documentation technique
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- DE
Détails du produit
Interroll Motorised Drive Roller
The Interroll BT100 series motorised driver roller has a length of 450mm and a diameter of 50mm. This electrically driven roller has a gear ratio of 21:1 and spindle thread size is M8. It replaces external components such as motors and gears that require frequent maintenance. This device can be used in dusty and/or moist environments. Additionally, the roller is powered by a brushed, mechanically commutated 24VDC motor.
Note:
Should not be used with Thyristor controlled power supply units.
Note:
Should not be used with Thyristor controlled power supply units.
Features and Benefits
Grooved to provide the drive to 9 slave rollers
Bush type motor
Quiet running with a noise level of approximate 47dB(A)
Service life of approximate 6000 operating hours (effective running time)
15 starts/stops per minute
Bush type motor
Quiet running with a noise level of approximate 47dB(A)
Service life of approximate 6000 operating hours (effective running time)
15 starts/stops per minute
Certifications
IP54 rated
Spécifications
Attribut | Valeur |
---|---|
Roller Diameter | 50mm |
Roller Length | 300mm |
Component Type | Motorised Drive Roller |
Load Capacity | 120kg |
Ratio | 21 |
Spindle Thread Size | M8 |
Maximum Conveying Speed | 24m/min |
Maximim Motor Voltage | 30V |
Minimum Motor Voltage | 18V |
- N° de stock RS:
- 437-2797
- Référence fabricant:
- 8AFKJAE6FT/H50T
- Fabricant:
- Interroll