- N° de stock RS:
- 101-3877
- Référence fabricant:
- 209-123
- Fabricant:
- Wago
400 En stock, livraison sous 1 jour(s) (stock Europe)
3430 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix L'unité (en paquet de 10)
0,445 €
(TVA exclue)
0,538 €
(TVA incluse)
Unité | Prix par unité | le paquet* |
10 + | 0,445 € | 4,45 € |
*prix conseillé |
- N° de stock RS:
- 101-3877
- Référence fabricant:
- 209-123
- Fabricant:
- Wago
Documentation technique
Législations et de normes
- Pays d'origine :
- CH
Détails du produit
Cage Clamp - 260 Series
Cage clamp® connection terminal blocks with side entry are screwdriver actuated and include fixing flanges at either end of the terminal block. A DIN Rail mounting adapter is also available which screw mounts into the base of the terminal blocks. It is recommended that the maximum distance between adapters is 35-40 mm.
Features and Benefits
2 Conductor-through terminal block
6 kV surge voltage
101-3877 is a mounting foot with screw for DIN 35 rail
6 kV surge voltage
101-3877 is a mounting foot with screw for DIN 35 rail
Wago Mounting Foot, DIN Rail Terminal Block Accessory Type, 1.8g Weight - 209 Series - 209-123
Need to bridge the gap between a component and a DIN rail? In steps this mounting foot from Wago. It simply screws onto a terminal block then its fixing flanges clip onto your rail. As this unit comes with a screw, you have the kit on hand to get set up straight away. Removal is a breeze too, as you just unclip the adapter when you want to modify your system.
Features & Benefits
Weighs just 1.8g, keeping extra load on your rail to a minimum
Compact dimensions of 6.4 (W) x 42.3mm (H) take up little space on busy arrangements
10 in a pack to keep you well-stocked
Compact dimensions of 6.4 (W) x 42.3mm (H) take up little space on busy arrangements
10 in a pack to keep you well-stocked
Applications
Power supplies
Control modules
Process and packaging facilities
Control modules
Process and packaging facilities
What's a DIN rail?
A DIN rail is a metal strip that's used to mount components like terminal blocks and circuit breakers in an equipment rack.
How much space should I leave between each mounting foot on my rail?
When you're installing multiple components with mounting feet onto your rail, it's best to leave a distance of 25 to 30mm between each adapter.
260 Series
Spécifications
Attribut | Valeur |
---|---|
Accessory Type | Mounting Foot with Screw |
Series | 209 |
For Use With | Terminal Blocks with mounting flange |
Mounting Type | DIN Rail |
Colour | Grey |
Hazardous Area Certification | IECEx |