Siemens, SITOP PSE200U DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 3A Output Current

  • N° de stock RS 769-7367
  • Référence fabricant 6EP1961-2BA31
  • Fabricant Siemens
Documentation technique
Législations et de normes
Déclaration de conformité RoHS
Pays d'origine : AT
Détails du produit

Siemens Selectivity Module

The Siemens SITOP PSE200U series of analogue selectivity module is a 4 channel DIN rail panel mount power supply with 24VDC input voltage. It has been designed to be connected to stabilised 24V DC power supplies with an output current up to 3A and split between four load circuits. The rated current for each output can be set individually with a potentiometer to the required range. If the rated current is exceeded for a certain time, the output will be switched off automatically and can be switched on after a waiting time using the modules pushbutton or the remote reset. The pushbutton can also be used to switch the output manually.
Advantages of a selectivity module
A power supply unit (PSU) cannot guarantee a fault-free supply when used on its own. The selectivity module offers reliable detection of overload or short-circuit in the circuit. A selectivity module enables reliable shutdown in case of overload regardless of cable lengths or cross-sections.

Features and Benefits

Highly efficient up to 97%
LEDs for rapid on-site fault localization
Operation temperature ranging between 0°C and 60°C
Remote reset possible from a central location
Screw terminal connection
Sequential connection of feeders to reduce total inrush current
Status message per channel


ATEX certified
cCSAus Class I Div. 2
CE certified
IEXEx certified

Attribut Valeur
Input Voltage 24V dc
Output Voltage 24 V dc
Output Current 3 A
Number of Outputs 4
Type Analogue
Height 80mm
Width 80mm
Minimum Temperature 0°C
Depth 72mm
Series SITOP PSE200U
Maximum Temperature +60°C
6 En stock, livraison dès le lendemain
Prix Each
(TVA exclue)
(TVA incluse)
Prix par unité
1 - 9
87,30 €
10 - 14
83,76 €
15 +
80,12 €