RS PRO IDM98IV Handheld Digital Multimeter, 10A ac 1000V ac 10A dc 1000V dc

  • N° de stock RS 873-2360
  • Fabricant RS PRO
Documentation technique
Législations et de normes
Statut RoHS non applicable
Pays d'origine : TW
Détails du produit

RS PRO IDM98IV Digital Multimeter

RS PRO IDM98IV Digital Multimeter is a handheld device which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed with 6000 count digital display and 62 segment bar graph. The multimeter is also CAT IV rated for 600V and CAT III rated for 1000V.

RS Pro has a range of digital multimeters which are great value for money and also high quality you can rely on.

Features and Benefits:

Extra-large scale white backlit display
True RMS
0.01% basic DCV accuracy
Automatic AC-DC Voltage detects with low impedance (Auto-V LoZ)
Smart Data Hold
Min / Max function
Frequency counter on AC mode
Capacitance measurement
Low battery indicator with segments
Auto Power Off (20 min)
CAT. IV 600 V / CAT. III 1000 V Safety standard
6000 Count digital display
VoltSeek (non-contact voltage detected)
Shock proof from a 4 m drop

What does it measure?
DC/AC Voltages
AC/DC Current
Resistance and continuity tester
Diode - open circuit voltage

AV Function:

ACV and ACA specifications are AC coupled, true RMS Crest factor up to 3.0 at 4000 counts

Accuracy:

±(% reading plus number of digits) at 23°C ±5°C 80% RH

Impedance:

10MΩ

Overload protection:

AC/DC 1000 V

What Is Included?

Battery is installed
Test lead set
Protective holster
User manual

Typical Applications:
A digital multimeter (DMM) is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

What is the difference between an analogue and a digital multimeter?
The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.

Standards

CAT. IV 600 V / CAT. III 1000 V

Spécifications
Attribut Valeur
Multimeter Type Handheld
Absolute Maximum DC Current Measurement 10A dc
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum AC Voltage Measurement 1000V ac
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum Resistance Measurement 40MΩ
Absolute Maximum Capacitance Measurement 10mF
Functions Measured AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance
True RMS Yes
Maximum Frequency 100kHz
Display Type LCD
Model Number p IDM98IV
AC Current Measurement Resolution 0.01mA ac
DC Current Measurement Resolution 0.01mA dc
DC Voltage Measurement Resolution 1V dc
Resistance Measurement Resolution 100mΩ
AC Voltage Measurement Resolution 0.1mV ac
Capacitance Measurement Resolution 0.01mF
Length 190mm
Height 48mm
Dimensions 190 x 94 x 48mm
Best DC Voltage Accuracy ±0.09 %
Best AC Voltage Accuracy ±1 %
Best Capacitance Measurement Accuracy ±1.2 %
Minimum Operating Temperature -10°C
Battery Life 200 h
Weight 460g
Safety Category Level CAT III, CAT IV
Best DC Current Accuracy ±1% + 3 Digits
Safety Category Voltage 600 V, 1000 V
Battery Type 1604A
Best Resistance Measurement Accuracy ±0.8 %
Maximum Operating Temperature +50°C
Best AC Current Accuracy ±1.5% + 3 Digits
Width 94mm
5 Livraison dès le lendemain
134 Sous 1 jours (stock Europe)
Prix Each
117,27
(TVA exclue)
141,90
(TVA incluse)
Unité
Prix par unité
1 +
117,27 €