- N° de stock RS:
- 131-1336
- Référence fabricant:
- 8.07.01 SWD Isolator
- Fabricant:
- SEGGER
7 En stock, livraison sous 1 jour(s) (stock Europe)
7 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
279,09 €
(TVA exclue)
337,70 €
(TVA incluse)
Unité | Prix par unité |
1 + | 279,09 € |
- N° de stock RS:
- 131-1336
- Référence fabricant:
- 8.07.01 SWD Isolator
- Fabricant:
- SEGGER
Documentation technique
Législations et de normes
Détails du produit
J-Link ARM SWD Isolator Board
The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.
Compatible Probes
J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM
Features
1kV DC optical isolation
+3.3V and +5Vdc target operation supported
Powered from probe and target
SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
Power consumption on target side: 25mA typical
SWD frequency: Up to 4MHz
3 x LEDs: Probe Power, Target Power and Target RESET
+3.3V and +5Vdc target operation supported
Powered from probe and target
SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
Power consumption on target side: 25mA typical
SWD frequency: Up to 4MHz
3 x LEDs: Probe Power, Target Power and Target RESET
Spécifications
Attribut | Valeur |
---|---|
Accessory Type | Adapter |
For Use With | J-Link Probes |
- N° de stock RS:
- 131-1336
- Référence fabricant:
- 8.07.01 SWD Isolator
- Fabricant:
- SEGGER