Better World
Schneider Electric, Acti 9, 63A, Energy Sensor, 1VA, Wireless
- N° de stock RS:
- 134-8659
- Référence fabricant:
- A9MEM1521
- Fabricant:
- Schneider Electric
6 En stock, livraison sous 1 jour(s) (stock Europe)
12 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
127,97 €
(TVA exclue)
154,84 €
(TVA incluse)
| Unité | Prix par unité |
| 1 + | 127,97 € |
Better World
Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables. Cliquez ici pour en savoir plus.
- N° de stock RS:
- 134-8659
- Référence fabricant:
- A9MEM1521
- Fabricant:
- Schneider Electric
Législations et de normes
Détails du produit
Acti9 PowerTag Energy Sensor
The Acti 9 Smartlink system is used to monitor the final distribution boards to any supervision system.
Modular Acti 9 devices in the Acti 9 Smartlink system are used to monitor, and measure the electrical distribution boards via a Modbus TCP/IP communication network.
The Acti 9 Smartlink system collects the data from electrical distribution boards in real time, thus contributing to achieve efficiency targets or monitoring final loads.
Modular Acti 9 devices in the Acti 9 Smartlink system are used to monitor, and measure the electrical distribution boards via a Modbus TCP/IP communication network.
The Acti 9 Smartlink system collects the data from electrical distribution boards in real time, thus contributing to achieve efficiency targets or monitoring final loads.
The system consists of:
Acti 9 Smart Link SI D.
PowerTag energy sensors (A9MEM1520, A9MEM1521, A9MEM1522, A9MEM1540, A9MEM1541 and A9MEM1542) are the wireless devices that are directly mounted on a circuit breaker and are connected to Acti 9 Smartlink SI D through wireless communication. The circuit breaker auxiliary allows you to monitor the devices and collects not only energy, but also power and alarm events on the voltage loss. PowerTag energy sensors are mounted upstream or downstream of Acti 9 circuit breaker or Multi 9 circuit breaker.
Pre-wired cables.
PowerTag energy sensors (A9MEM1520, A9MEM1521, A9MEM1522, A9MEM1540, A9MEM1541 and A9MEM1542) are the wireless devices that are directly mounted on a circuit breaker and are connected to Acti 9 Smartlink SI D through wireless communication. The circuit breaker auxiliary allows you to monitor the devices and collects not only energy, but also power and alarm events on the voltage loss. PowerTag energy sensors are mounted upstream or downstream of Acti 9 circuit breaker or Multi 9 circuit breaker.
Pre-wired cables.
The system offers the following advantages and services:
Calculation functions
Telemetering applications
Monitor load unbalance
Monitor power and voltage loss
Energy management and regulations
Telemetering applications
Monitor load unbalance
Monitor power and voltage loss
Energy management and regulations
Acti 9 Smartlink SI D is a wireless connection to Modbus TCP/IP concentrator.
Spécifications
Attribut | Valeur |
|---|---|
| Manufacturer k.i.m. | Schneider Electric |
| Height | 16.5mm |
| Depth | 42.6mm |
| Current Rating | 63A |
| Range | Acti 9 |
| Supply Voltage | 220 → 240V ac |
| Maximum Operating Temperature | +60°C |
| Wired/Wireless | Wireless |
| Width | 36mm |
| Better World Product | Yes |
| Better World Verification | Green Premium |
| Mounting Type | Plug-On Mount |
| Minimum Operating Temperature | -25°C |
| Power Consumption | 1VA |
| IP Rating | IP20 |
| For Use With | Acti 9 iC65, Acti 9 iID, Acti 9 iID K, Acti 9 iK60, Acti 9 iKQ, Acti 9 iKQE RCBO, Acti 9 K60, Acti 9 Reflex iC60, Acti 9 Single Terminal iC60, Multi 9 C32N, Multi 9 C60, Multi 9 C65, Multi 9 ID |