RS PRO Centrifugal Fan, 24 V dc, 30cfm, DC Operation, 120 x 120 x 31mm
- N° de stock RS:
- 787-4029
- Fabricant:
- RS PRO
11 En stock, livraison sous 1 jour(s) (stock Europe)
181 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
43,64 €
(TVA exclue)
52,80 €
(TVA incluse)
| Unité | Prix par unité |
| 1 - 4 | 43,64 € |
| 5 - 11 | 41,76 € |
| 12 - 24 | 39,88 € |
| 25 - 49 | 38,49 € |
| 50 + | 37,18 € |
- N° de stock RS:
- 787-4029
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
- Pays d'origine :
- TW
Détails du produit
RS PRO Centrifugal Fan, 120 x 120 x 31 mm, 30 CFM, 24 V DC
This centrifugal fan or blower from RS PRO recirculates and propels air in air conditioners and air conveyors. You'll commonly find it used in HVAC (heating, ventilation and air conditioning) systems in home and office environments.
The frame and impeller are made of polybutylene terephthalate (PBT), which won't ignite or act as a source of fuel in the event of a fire. As the fan is chemical and stain-resistant, it's easy to clean, saving you time during maintenance. The blower is also easy to install as it comes with pre-drilled holes. It complies with the RoHS (Restriction of Hazardous Substances) requirements, meaning it contains only minimal amounts of any harmful materials.
The frame and impeller are made of polybutylene terephthalate (PBT), which won't ignite or act as a source of fuel in the event of a fire. As the fan is chemical and stain-resistant, it's easy to clean, saving you time during maintenance. The blower is also easy to install as it comes with pre-drilled holes. It complies with the RoHS (Restriction of Hazardous Substances) requirements, meaning it contains only minimal amounts of any harmful materials.
Features and Benefits
- DC operation
- Airflow of 30 CFM (cubic feet per minute)
- Ball-bearing type
- Blower type
- Brushless commutation type
- Dimensions of 120 x 120 x 31 mm
- Forward direction of curve
- Fan speed of 3000 rpm (rotations per minute)
- Maximum current of 370 mA
- Mounting hole diameter of 3.2 mm
- Noise level of 49 dB(A)
- Static pressure of 0.49 in/H2O
- Supply voltage of 24 V DC
- Lead wire termination type
Spécifications
Attribut | Valeur |
|---|---|
| Supply Voltage | 24 V dc |
| Blower Type | Blower |
| AC or DC Operation | DC |
| Air Flow | 30cfm |
| Height | 120mm |
| Width | 120mm |
| Depth | 31mm |
| Dimensions | 120 x 120 x 31mm |
| Fan Speed | 3000rpm |
| Noise Level | 49dB(A) |
| Bearing Type | Ball |
| Maximum Current | 370mA |
| Direction of Curve | Forward |
| Static Pressure | 0.49in/H2O |
| Commutation Type | Brushless |
| Mounting Hole Diameter | 3.2mm |
| Termination Type | Lead Wire |