- N° de stock RS:
- 339-8445
- Référence fabricant:
- SY 25 TF
- Fabricant:
- SKF
En cours d'approvisionnement -expédition le 07/05/2024, pour livraison dès le lendemain
Ajouté
Prix la pièce
39,33 €
(TVA exclue)
47,59 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 39,33 € |
5 - 9 | 37,76 € |
10 - 24 | 36,97 € |
25 + | 36,19 € |
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
- N° de stock RS:
- 339-8445
- Référence fabricant:
- SY 25 TF
- Fabricant:
- SKF
Documentation technique
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- IT
Détails du produit
Cast Iron Pedestal Bearing Unit
Available in metric or imperial bore sizes.
Slotted bolt holes
Lubrication via grease nipple
Lubrication via grease nipple
SKF Plummer Block House, 25 mm ID - SY 25 TF
Do you need maximum protection for bearings in challenging environments? This SKF plummer block house offers a handy solution. Its strong cast iron protective casing stands up to high-speed applications and heavy shock loads while maintaining effective damping and thermal conductivity. A superior sealing system protects bearings from water and contaminants while also retaining the unit's lubrication, cutting down on the need for re-greasing. This pedestal mount housing has a 25 mm inside diameter and is supplied ready to install with slotted holes to bolt it securely into place.
Available in metric or imperial bore sizes
Reduced noise and vibration
Ready to use and maintenance-free
Centre height of 36.5 mm
Depth of 36 mm
Length of 130 mm
Centre-to-centre mount hole of 102 mm
Mount hole size of 10 mm
Overall height of 70.5 mm
Reduced noise and vibration
Ready to use and maintenance-free
Centre height of 36.5 mm
Depth of 36 mm
Length of 130 mm
Centre-to-centre mount hole of 102 mm
Mount hole size of 10 mm
Overall height of 70.5 mm
Application Information
Packaging equipment
Conveyor systems
Agricultural equipment
Construction plants
Conveyor systems
Agricultural equipment
Construction plants
Spécifications
Attribut | Valeur |
---|---|
Inside Diameter | 25mm |
Bearing Unit Type | Plummer Block |
Material | Cast Iron |
Centre Height | 36.5mm |
Mount Hole Size | 10 mm |
Length | 130mm |
Depth | 36mm |
Overall Height | 70.5mm |
Mount Hole Centre-to-Centre | 102mm |