- N° de stock RS:
- 711-6329
- Référence fabricant:
- 1SBN010110R1001 CA4-01
- Fabricant:
- ABB
- N° de stock RS:
- 711-6329
- Référence fabricant:
- 1SBN010110R1001 CA4-01
- Fabricant:
- ABB
Législations et de normes
Détails du produit
ABB Auxiliary Contact, Screw Terminals, 6A Current Rating - CA4 Series - 1SBN010110R1001 CA4-01
Want to add snappy signalling to your system? Loop in this ABB auxiliary contact. It attaches to a contactor and works as part of a larger system to notify a controller when the contactor switches. With its instantaneous contacts, the device instantly opens and closes its circuit to send signals in a flash. Installation is trouble-free, as the unit slots onto a contactor's front plate. There's no need to worry about handling wires, thanks to screw terminals that keep your fingers clear while securing conductors.
Features & Benefits
• Handles up to 1,200 cycles an hour to keep up with fast-switching systems
• Accepts wires sized between 0.75 and 2.5mm² for versatile installation
• Tackles surge voltages up to 6kV, cutting the risk of hardware damage from electrical hazards
• Insulating plastic body minimises exposure to hazardous loads for safe handling
• Accepts wires sized between 0.75 and 2.5mm² for versatile installation
• Tackles surge voltages up to 6kV, cutting the risk of hardware damage from electrical hazards
• Insulating plastic body minimises exposure to hazardous loads for safe handling
Applications
• Automated assembly lines
• Packing plants
• Automotive industry
• Packing plants
• Automotive industry
Why should I signal a control device when my contactor switches?
Control devices oversee complex setups. By telling yours when a contactor has switched, it can tell other linked components to turn on or off, which keeps your automated process running without a glitch.
Spécifications
Attribut | Valeur |
---|---|
Number of Contacts | 1 |
Normal State Configuration | 1NC |
Mounting Style | Front Mount |
Series | CA4 |
Contact Current Rating | 6 A |
Terminal Type | Screw |
Pole and Throw Configuration | SP |
Contact Voltage Rating | 600 V dc, 690 V ac |