MEMS audio single ended microphone

Documentation technique
Législations et de normes
Déclaration de conformité RoHS
Détails du produit

Features:

• Single supply voltage operation 1.52 V - 3.6 V
• Omnidirectional sensitivity
• High signal-to-noise ratio
• High acoustic overload point: 130 dBSPL typ.
• Package compliant with reflow soldering
• Enhanced RF immunity
• Ultra-flat frequency response
• Low latency
• Ultra-low-power: 150 μA max
• ECOPACK®, RoHS, and “Green” compliant

Description:

The MP23ABS1 is a compact, low-power microphone built with a capacitive sensing element and an IC interface.

The sensing element, capable of detecting acoustic waves, is manufactured using a specialized silicon micromachining process to produce audio sensors.

The MP23ABS1 has an acoustic overload point of 130 dBSPL with a typical 64 dB signal-to-noise ratio.

The sensitivity of the MP23ABS1 is -38 dBV ±1 dB @ 94 dBSPL, 1 kHz.

The MP23ABS1 is available in a package compliant with reflow soldering and is guaranteed to operate over an extend

Spécifications
Attribut Valeur
Mounting Type Surface Mount
Package Type RHLGA
Pin Count 5
Dimensions 3.5 x 2.65 x 1.08mm
Length 3.5mm
Width 2.65mm
Height 1.08mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 1.52 V
Minimum Operating Temperature -40 °C
En cours d'approvisionnement - expédition le 28/02/2020, livraison sous 1 jour(s)
Prix Each (In a Pack of 5)
1,90
(TVA exclue)
2,30
(TVA incluse)
Unité
Prix par unité
le paquet*
5 - 45
1,90 €
9,50 €
50 - 495
1,60 €
8,00 €
500 - 995
1,12 €
5,60 €
1000 - 2495
0,92 €
4,60 €
2500 +
0,86 €
4,30 €
*prix conseillé
Options de conditionnement :