NOA1213CUTAG ON Semiconductor, Photoelectric Sensor Surface Mount 6-Pin

Documentation technique
Législations et de normes
Déclaration de conformité RoHS
Pays d'origine : TW
Détails du produit

The NOA1213 is a very low power ambient light sensor (ALS) with an analog current output and a power down mode to conserve power. Designed primarily for handheld device applications, the active power dissipation of this chip is less than 8 A at dark and its quiescent current consumption is less than 200 pA in power down mode. The device can operate over a very wide range of voltages from 2 V to 5.5 V.

Photopic Spectral Response
Senses Ambient Light and Provides an Output Current Proportional to the Ambient Light Intensity
Dynamic Dark Current Compensation
Three Selectable Output Current Gain Modes in Approximately 10x Steps
Power Down Mode
Less than 18 A at 100 lux Active Power Consumption in Medium Gain Mode (Less than 8 A at Dark)
Less than 200 pA Quiescent Power Dissipation in Power Down Mode at All Light Levels
Linear Response Over the Full Operating Range
Senses Intensity of Ambient Light from ∼0 lux to Over 100,000 lux

Spécifications
Attribut Valeur
Typical Rise Time 1.5 (Minimum)ms
Typical Fall Time 300 (Maximum)µs
Number of Pins 6
Mounting Type Surface Mount
Application Automobile Dashboard, Cameras, Cell Phones, Digital Picture Frames, Digital Signage, Displays & Infotainment, GPS, Laptops, LCD TVs & Monitors, LED Indoor/Outdoor Residential & Street Lights, Mobile Devices with Displays or Backlit Keypads, MP3 Players, Notebooks, PDAs, Video Recorders
Package Type CUDFN
Dimensions 1.6 x 1.6 x 0.6mm
Height 0.6mm
Length 1.6mm
Maximum Wavelength Detected 590nm
Width 1.6mm
Output Signal Type Analogue
Series NOA1213
45500 En stock pour livraison sous 1 jour(s)
Prix Each (In a Pack of 50)
0,268
(TVA exclue)
0,324
(TVA incluse)
Unité
Prix par unité
le paquet*
50 - 50
0,268 €
13,40 €
100 - 450
0,215 €
10,75 €
500 - 950
0,21 €
10,50 €
1000 - 1950
0,204 €
10,20 €
2000 +
0,199 €
9,95 €
*prix conseillé
Options de conditionnement :