LCBSBM-5-01A2-RT, 7.9mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- N° de stock RS:
- 721-4714
- Référence fabricant:
- LCBSBM-5-01A2-RT
- Fabricant:
- Essentra
800 En stock, livraison sous 1 jour(s) (stock Europe)
6000 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix L'unité (en paquet de 40)
0,244 €
(TVA exclue)
0,295 €
(TVA incluse)
| Unité | Prix par unité | le paquet* |
| 40 - 360 | 0,244 € | 9,76 € |
| 400 - 760 | 0,234 € | 9,36 € |
| 800 - 1960 | 0,227 € | 9,08 € |
| 2000 + | 0,207 € | 8,28 € |
| *prix conseillé | ||
- N° de stock RS:
- 721-4714
- Référence fabricant:
- LCBSBM-5-01A2-RT
- Fabricant:
- Essentra
Documentation technique
Législations et de normes
- Pays d'origine :
- GB
Détails du produit
Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
Spécifications
Attribut | Valeur |
|---|---|
| PCB Support Type | Adhesive-Backed Support |
| Overall Height | 16.6mm |
| Body Height | 7.9mm |
| Support Base Dimensions | 12.7 x 12.7mm |
| PCB Hole Diameter | 3.18mm |
| PCB Thickness | 1.57mm |
| Material | Nylon |
| Support Base Length | 12.7mm |
| Support Base Width | 12.7mm |
- N° de stock RS:
- 721-4714
- Référence fabricant:
- LCBSBM-5-01A2-RT
- Fabricant:
- Essentra