RS PRO 1.75mm Tropical Wood 3D Printer Filament, 250g

  • N° de stock RS 832-0627
  • Fabricant RS PRO
Documentation technique
Législations et de normes
Déclaration de conformité RoHS
Pays d'origine : NL
Détails du produit

RS 3D Printer Filament WOOD

WOOD is a modified PLA based type of filament, that smells and feels like wood. The filament is a bit brittle, but tough enough to be supplied in reels of 300 gram to 1kg. It prints easy, but we advise a slightly bigger nozzle to avoid blocking. Due to a low shrinkage factor WOOD will not deform after cooling. Poly Lactic Acid is a biodegradable plastic made from renewable natural resources and one of the most popular materials for 3D printing

Feels and smells like WOOD
Easy to print at low temperature
Very low warping
Preferably printed with > 0.4mm nozzle

Once you’ve purchased your filament it’s important to store it correctly to maintain its quality. Over time the plastic will absorb moisture from the air, creating small water bubbles in the filament. These bubbles when heated in the extruder nozzle will quickly reach boiling point, spoiling the print. The use of desiccant dehumidifiers to absorb the moisture is highly recommend


Due to its low tendency to warp WOOD can also be printed without a heated bed. If you have a heated bed the recommended temperature is ± 35-60゚C.
WOOD can be used on all common desktop FDM or FFF technology 3D printers.
We advise a nozzle > 0,4mm
Storage: Cool and dry (15-25゚C) and away from UV light. This enhances the shelf life significantly

Attribut Valeur
Material Type Special Materials
Printing Technology FDM
Machine Specific No
Colour Tropical Wood
For Use With Common Desktop 3D Printers
Weight 300g
Diameter 1.75mm
Printing Material Wood
12 En stock pour livraison sous 1 jour(s)
Prix Each
(TVA exclue)
(TVA incluse)
Prix par unité
1 - 2
22,05 €
3 +
20,96 €