Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Voir plus Voir moins

Filtres

Afficher 1 - 20 des 130 produits
Nombre de résultats par page
Description Prix Type Series Number of Contacts Series Number
N° de stock RS 314-8414
Référence fabricant86-5
86,63 €
Each
Unité
Positioner M22520/7-06 - -
N° de stock RS 760-0180
Référence fabricantDCE.91.070.3MVM
MarqueLemo
104,12 €
Each
Unité
Positioner M - -
N° de stock RS 515-1096
Référence fabricantM22520/2-09
MarqueGlenair
240,34 €
Each
Unité
Positioner M22520/2-09 - -
N° de stock RS 822-7755
Référence fabricant63819-0975
MarqueMolex
55,54 €
Each
Unité
Locator T9999 - 63819
N° de stock RS 314-7590
Référence fabricantTH163
174,24 €
Each
Unité
Turret M22520/1-04 - -
N° de stock RS 876-2056
Référence fabricant169403
27,96 €
Each
Unité
Locator AMP - -
N° de stock RS 360-1713
Référence fabricantTH1A
MarqueGlenair
242,97 €
Each
Unité
Turret M22520/1-02 - -
N° de stock RS 696-1642
Référence fabricantTA-0002-146-0001
31,75 €
Each
Unité
Locator TA - -
N° de stock RS 713-3671
Référence fabricantVH435
MarqueGlenair
190,96 €
Each
Unité
Turret ITS - -
N° de stock RS 756-7345
Référence fabricant09990000531
MarqueHARTING
171,55 €
Each
Unité
Positioner D-sub - -
N° de stock RS 760-0183
Référence fabricantDCE.91.070.5MVC
MarqueLemo
114,50 €
Each
Unité
Positioner M - -
N° de stock RS 451-5225
Référence fabricantG125
129,69 €
Each
Unité
- M22520/3-1 - -
N° de stock RS 876-2080
Référence fabricant4-539785-7
55,17 €
Each
Unité
Locator Mini CERTI-LOK - -
N° de stock RS 114-7920
Référence fabricant09990000112
MarqueHARTING
11,97 €
Each
Unité
Locator Han-Com - -
N° de stock RS 329-9843
Référence fabricant09990000304
MarqueHARTING
50,59 €
Each
Unité
Crimping Head - - -
N° de stock RS 765-9858
Référence fabricant15019/SP
MarqueBulgin
157,30 €
Each
Unité
Positioner 6000 - -
N° de stock RS 822-7717
Référence fabricant63811-8775
MarqueMolex
48,52 €
Each
Unité
Locator T9999 - 63811
N° de stock RS 864-3431
Référence fabricant354003-8
177,75 €
Each
Unité
Wire Crimper - - -
N° de stock RS 173-9635
Référence fabricant63819-1075
MarqueMolex
51,15 €
Each
Unité
Locator 207128 - 63819
N° de stock RS 213-4448
Référence fabricant690081093
MarqueMolex
912,30 €
Each
Unité
- 69008 - -