Phoenix Contact Electronic Circuit breaker
- N° de stock RS:
- 801-6971
- Référence fabricant:
- 0912018
- Fabricant:
- Phoenix Contact
Produit discontinué
- N° de stock RS:
- 801-6971
- Référence fabricant:
- 0912018
- Fabricant:
- Phoenix Contact
Documentation technique
Législations et de normes
- Pays d'origine :
- DE
Détails du produit
ECP Series - Phoenix Contact Circuit Breakers
ECP series selective circuit breaker which can be plugged in TMCP socket, signalling by two-colour LED, floating signal contact, on/off pushbutton.
Design width of just 12.5 mm
Capacitive loads can be switched on and loads are only switched off in the event of an overload or short circuit
Selective protection of all 24V dc load circuits at switched-mode power supply units
Operating or error state indicated by LED and integrated signal contacts
Combination of active electronic current limitation and proven circuit breaker technology including electrical isolation
Residual current always limited to 1.8 times the nominal current
Capacitive loads can be switched on and loads are only switched off in the event of an overload or short circuit
Selective protection of all 24V dc load circuits at switched-mode power supply units
Operating or error state indicated by LED and integrated signal contacts
Combination of active electronic current limitation and proven circuit breaker technology including electrical isolation
Residual current always limited to 1.8 times the nominal current
- N° de stock RS:
- 801-6971
- Référence fabricant:
- 0912018
- Fabricant:
- Phoenix Contact