- N° de stock RS:
- 146-0719
- Référence fabricant:
- GP1S173LCS2F
- Fabricant:
- Sharp
800 En stock pour livraison sous 1 jour(s)
Ajouté
Prix L'unité (dans un plateau de 200)
0,648 €
(TVA exclue)
0,784 €
(TVA incluse)
Unité | Prix par unité | le plateau* |
200 - 200 | 0,648 € | 129,60 € |
400 - 800 | 0,608 € | 121,60 € |
1000 + | 0,497 € | 99,40 € |
*prix conseillé |
- N° de stock RS:
- 146-0719
- Référence fabricant:
- GP1S173LCS2F
- Fabricant:
- Sharp
Documentation technique
Législations et de normes
- Pays d'origine :
- CN
Détails du produit
GP1S173LCS2F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs.
Transmissive with phototransistor output
Highlights Special position hooks compatible with 3 different Plate thicknesses (1.0, 1.2, 1.6mm), Snap insertion
Key Parameters Gap Width : 5mm, Slit Width (detector side) : 0.5mm, Package : 17 ´ 12.8 ´ 8mm (without connector and hooks), Connector : Tyco Electronics JAPAN G.K. (173977-3 and 179228-3)
RoHS directive compliant
Highlights Special position hooks compatible with 3 different Plate thicknesses (1.0, 1.2, 1.6mm), Snap insertion
Key Parameters Gap Width : 5mm, Slit Width (detector side) : 0.5mm, Package : 17 ´ 12.8 ´ 8mm (without connector and hooks), Connector : Tyco Electronics JAPAN G.K. (173977-3 and 179228-3)
RoHS directive compliant
Spécifications
Attribut | Valeur |
---|---|
Output Device | Phototransistor |
Number of Channels | 1 |
Typical Rise Time | 3µs |
Typical Fall Time | 4µs |
Mounting Type | Snap-In |
Number of Pins | 5 |
Dimensions | 27.1 x 9.8 x 16.3mm |
Height | 16.3mm |
Length | 27.1mm |
Maximum Operating Temperature | -30°C |
Minimum Operating Temperature | +95°C |
Slot Width | 4.3mm |
Width | 9.8mm |
Operating Temperature Range | -30 → +95°C |
Series | GP1S173L |
Output Signal Type | Analogue |